WOOD STABILIZING RESINS

Wood stabilization is the process of vacuuming all the air from the wood and replacing the wood with resin. Regardless of the condition of the wood before the process (dry, withered or infested),very high pressure and vacuum are switched and a special resin penetrates the entire volume of the block, then the resin in the wood is allowed to harden (polymerize) and thus the wood is stabilized. The stabilized wood is used mainly by manufacturers of knives, weapons stocks, billiard cues, jewelry, non-traditional and luxury pens, exclusive bows, etc.

After stabilization, wood will increase its weight by 25-200 % depending on the type and condition of the wood (hard oak or ebony vs. spalled chestnut), the wood will strengthen, harden and significantly reduce its ability to continue "working". The stabilization releases the tension in the wood and thus eliminates its possible deformations. In addition, it becomes moisture-resistant, and its absorbency is approaching zero.

Wood stabilizing resins are most often used on the basis of acrylates and epoxies.

Acrylic stabilizing resin - Veropal WSB A (WSB = wood stabilization; A = acrylate) are used on wood more compact and harder, only with microcracks. Its advantage is that it is one-component and that it can be used repeatedly after activation with proper storage in the cold (preferably in the refrigerator). That is, pour the rest back into some container after stabilization, close and store in the refrigerator. After a time of, for example, 2 months, this resin can stabilize some other wood. The disadvantage is that the acrylates need a higher temperature (85-95 ° C) for polymerization, so the stabilized wood is wrapped in foil and placed in an oven or oven at the desired temperature for 2 hours.

Epoxy stabilizing resin Veropal WSB E-LV (WSB = wood stabilization; E = epoxy; LV = low viscosity) is used for softer woods, with larger cracks, knots and holes or for large pieces (planks or their parts). It is a two-component resin with a long workability time (up to 5 hours), very thin, run-in and well-absorbed into wood. After mixing components A and B, slow polymerization begins, so it cannot be used repeatedly. Cures at normal temperature (approx. 1.5-2 days). The process can be accelerated in the same way as for the curing of Veropal WSB A acrylic resin.

Bestsellers

cerny
 
€5,91
(€4,88 excl. VAT)
wsba aktivator a
 
from €23,84
(from €19,70 excl. VAT)
zeleny
 
€5,91
(€4,88 excl. VAT)
hnedy
 
€5,91
(€4,88 excl. VAT)
modra
 
€5,91
(€4,88 excl. VAT)
Veropal WSB PR oranžový ve dřevě
 
€5,91
(€4,88 excl. VAT)
Veropal WSB PR YELLOW – Dye for Wood Stabilization
 
€5,91
(€4,88 excl. VAT)
Veropal WSB PR RED – Dye for Wood Stabilization
 
€5,91
(€4,88 excl. VAT)
Veropal WSB PR BORDO – Dye for Wood Stabilization
 
€5,91
(€4,88 excl. VAT)
Seřadit dle
10 items total
Zobrazit filtry

Price

533
0.040749796533

Brands

Certifikace styku s potravinami

DLE TYPU PRYSKYŘICE

MAX. VRSTVA LITÍ

TYP VÝROBKU

10 items to display
wsb elv
NAŠE ZNAČKA - VYROBENO V ČR PRO STYK S POTRAVINAMI
from €27,11 excl. VAT
from €32,80 / pcs


✅ Special epoxy resin for wood stabilization
✅ Excellent penetration – strengthens and preserves even without vacuum
✅ Low viscosity – ideal for vacuum stabilization, but works well without it too
✅ Clear, odorless, and easy to use
✅ Suitable for wood, cork, stone, and other natural materials

+ more
1880/1-4
cerny
NAŠE ZNAČKA - VYROBENO V ČR
€4,88 excl. VAT
€5,91 / pcs

VEROPAL WSB PR BLACK is a highly concentrated black dye for coloring epoxy and acrylic stabilizing resin when stabilizing wood or other porous materials.

1844
modra
NAŠE ZNAČKA - VYROBENO V ČR
€4,88 excl. VAT
€5,91 / pcs

VEROPAL WSB PR BLUE is a highly concentrated blue dye for coloring epoxy and acrylic stabilizing resin when stabilizing wood or other porous materials.

1847
Veropal WSB PR BORDO – Dye for Wood Stabilization
NAŠE ZNAČKA - VYROBENO V ČR
€4,88 excl. VAT
€5,91 / pcs

VEROPAL WSB PR BORDO is a highly concentrated bordo dye for coloring epoxy and acrylic stabilizing resin when stabilizing wood or other porous materials.

1842
Marcela Provazníková
“Skvělá zkušenost – přístup pánů z epoxio.cz fakt oceňuju. Pomohli s výběrem, poradili s postupem a výsledek stojí za to. Takhle má vypadat profi podpora!”
hnedy
NAŠE ZNAČKA - VYROBENO V ČR
€4,88 excl. VAT
€5,91 / pcs

VEROPAL WSB PR BROWN is a highly concentrated brown dye for coloring epoxy and acrylic stabilizing resin when stabilizing wood or other porous materials.

1848
zeleny
NAŠE ZNAČKA - VYROBENO V ČR
€4,88 excl. VAT
€5,91 / pcs

VEROPAL WSB PR GREEN is a highly concentrated green dye for coloring epoxy and acrylic stabilizing resin when stabilizing wood or other porous materials.

1841
Veropal WSB PR oranžový ve dřevě
NAŠE ZNAČKA - VYROBENO V ČR
€4,88 excl. VAT
€5,91 / pcs

VEROPAL WSB PR ORANGE is a highly concentrated orange dye for coloring epoxy and acrylic stabilizing resin when stabilizing wood or other porous materials.

1846
Veropal WSB PR RED – Dye for Wood Stabilization
NAŠE ZNAČKA - VYROBENO V ČR
€4,88 excl. VAT
€5,91 / pcs

VEROPAL WSB PR RED is a highly concentrated red dye for coloring epoxy and acrylic stabilizing resin when stabilizing wood or other porous materials.

1843
Veropal WSB PR YELLOW – Dye for Wood Stabilization
NAŠE ZNAČKA - VYROBENO V ČR
€4,88 excl. VAT
€5,91 / pcs

VEROPAL WSB PR YELLOW is a highly concentrated yellow dye for coloring epoxy and acrylic stabilizing resin when stabilizing wood or other porous materials.

1845
wsba aktivator a
NAŠE ZNAČKA - VYROBENO V ČR
from €19,70 excl. VAT
from €23,84 / pcs


✅ Professional-grade acrylic resin for vacuum wood stabilization
✅ Ultra-low viscosity – penetrates even the finest wood pores
✅ Excellent workability – easy to sand and polish after curing
✅ Perfect for knife makers, woodworkers, and resin artists
✅ Enhances wood grain and significantly extends material life

+ more
1874/1KG

Store rating

5,0 1047 ratings

Michal Hypský | 29.06.2025
Mohu vrele doporucit. Vsichni jsou ochotni odpovidat na otazky a rychlost vyrizeni byla skvela 👌
Petra Matějková | 03.07.2025
Jsem moc spokojená
Richard Radina | 26.06.2025
Každý nakup rychle vyřízen, potřeboval jsem poradit, opět rychlá reakce. Jsem spokojen, doporučuji.
tomáš morbicer | 29.06.2025
dobrý výběr, rychlé dodání
Ihor | 26.06.2025
Dnešní kurz lití epoxidové pryskyřice byl výborně zorganizovaný. Velmi oceňuji praktické ukázky, jasný výklad a trpělivý přístup lektorů. Dozvěděl jsem se spoustu užitečných tipů a triků, které mi pomohou v další práci s pryskyřicí. Doporučuji všem, kdo chtějí začít nebo si rozšířit znalosti.
Karolína Remešová | 07.07.2025
Superrychlé dodání, moc děkuji
Petr Móza | 23.06.2025
Maximální spokojenost
Roman Müller | 22.06.2025
Naprostá spokojenost.Hlavne přehledné stránky a krásné do detailů popsány každý produkt.
Kvasnička Jaroslav | 26.06.2025
Naprostá spokojenost.
Václav Hikl | 03.07.2025
Mohu doporučit. Rychlost dodání, bezpečné zabalení, návody a tipy na přehledných stránkách. Rád tu nakupuji a nechávám se inspirovat :-).
Petr Homola | 10.07.2025
Děkuju za skvělý workshop! Výborně připravené a lektoři jsou odborníci v oboru.