Set for Debubbling – Chamber 12.5 L and Vacuum Pump VP125

Product detailed description

VC2523A 12.5L aluminum vacuum chamber set with heavy duty polycarbonate lid and powerful VP125 single stage oil pump with 71 L/min (2.5CFM) free air displacement. This set is perfect for debubbling (degassing) cast products such as epoxies, polyurethanes, silicones, plasters, waxes, etc. The product is made of the highest quality materials. Do not use for stabilizing wood, especially acrylic, the spillages of which could damage the polycarbonate lid and implosion could occur.

The body of the chamber is made of aluminum, its volume is 12.5 l and the internal dimensions are: diameter 25 cm and height 23 cm.

• The safety cover is made of strong polycarbonate,
• The chamber is equipped with a vulcanized silicone seal. The seal used is reliable and has a low susceptibility to mechanical deformation,
• The excellent transparency of the lid allows you to observe the degassing process,
• Two ball valves allow you to freely control the course of the degassing process,
• The mounted glycerine vacuum gauge shows the current vacuum in the chamber,
• The chamber is equipped with an intake air filter, which effectively prevents impurities from reaching the degassed material,
• The chamber is connected to the vacuum using a pneumatic fitting and a reinforced hose with an internal diameter of 8 mm and a length of 1.5 m. The product is made of the highest quality materials.

The vacuum pump VP125 is a single-stage, oil-filled vacuum with a free air pressure of 71 l/min (2.5CFM) and a final vacuum of 5 Pa.

• The new range of vacuum cleaners is characterized by high efficiency, a very high vacuum value and quiet operation,
• RS pumps represent high quality at a reasonable price and are covered by a one-year warranty,
• All RS series pumps are equipped with an oil mist filter and a one-way mechanical valve. This valve prevents backflow of oil from the pump into the chamber.

All vacuum systems are 100% checked and verified before shipping to the customer.

Warning: Chambers with polycarbonate lids are not intended for wood stabilization or for working with alcohol, ethanol, acetone, monomers or polymers based on styrene-based acrylic resins. For these purposes, we recommend using chambers with a tempered glass lid, see Wood Stabilization Kits

Set contents:

• Vacuum pump VP125,
• The oil needed for the first start,
• Aluminum vacuum chamber VC2523A 250 mm x 230 mm,
• Lid made of strong polycarbonate,
• Industrial vulcanized 100% silicone (glue-free) seal with a hardness of 60 ShA,
• Air hose with glycerin gauge and air filter,
• Reinforced pneumatic hose with an end enabling connection to a vacuum cleaner,
• Instructions for use.