Kulatá forma z polypropylenu šroubovaná

Code: 12129/PR 12129/PR2 12129/PR3 12129/PR4 12129/PRU 12129/PRU2 12129/PRU3 12129/PRU4 Choose variant

Kulatá forma z polypropylenu šroubovaná

Code: 12129/PR 12129/PR2 12129/PR3 12129/PR4 12129/PRU 12129/PRU2 12129/PRU3 12129/PRU4 Choose variant

Round mold for repeated production of epoxy castings. Easily disassembled and folded back, suitable for clocks, side tables, etc.

€60,14 / pcs €67,04 / pcs €72,94 / pcs €117,95 / pcs €179,22 / pcs €249,03 / pcs €280,20 / pcs €311,33 / pcs from €60,14 / pcs €49,70 excl. VAT €55,40 excl. VAT €60,28 excl. VAT €97,48 excl. VAT €148,12 excl. VAT €205,81 excl. VAT €231,57 excl. VAT €257,30 excl. VAT from €49,70 excl. VAT
Skladem (2 pcs) Skladem (2 pcs) Skladem (2 pcs) Skladem (3 pcs) Na objednávku - dodání do 2 týdnů (1 pcs) Na objednávku - dodání do 2 týdnů (1 pcs) Na objednávku - dodání do 2 týdnů (1 pcs) Na objednávku - dodání do 2 týdnů (1 pcs) Choose variant
Rozměry
Chosen variant is not available. Reset selected parameters.
Delivery to:
20/05/2025 20/05/2025 20/05/2025 20/05/2025 05/06/2025 05/06/2025 05/06/2025 05/06/2025 Choose variant

Detailed information

Product detailed description

Round mold for repeated production of epoxy castings in combination with wood and other materials. Perfectly demoldable, easy to disassemble and fold back. Suitable for clocks, side tables, etc.

Material: laminate + ABS

Sizes:

  • Circle diameter 30 cm (base square 400 x 400 mm)
  • Circle diameter 40 cm (base square 500 x 500 mm)
  • Circle diameter 50 cm (base square 600 x 600 mm)

In the case of an atypical request, it is possible contact us.

Preparation procedure for epoxy coating:

  • The laminate underlay needs to be separated (either stick polypropylene tape or a chemical separator).
  • Cover the inside of the ABS edge with polypropylene tape.
  • Press the silicone sealant into the milled circular groove in the laminate underlay. Give enough material to fill the groove and prevent epoxy from flowing into it.
  • Don't forget to cover the joined edges of the ABS edges with tape.
  • Press the ABS edge covered with tape into the sealant in the groove and then smooth the silicone sealant from inside and outside of the mold.
  • Allow to cure according to the instructions of the silicone used (usually 1 day).
  • Insert the potted objects into the mold (if necessary, weigh them down or ensure that they do not float, if necessary).
  • Cover with well homogenized resin.

Demolding procedure:

  • After curing, cut the silicone on the outside of the ABS edge (up to that edge) with a knife and, if necessary, remove this silicone.
  • Cut the tape on the joined sides of the ABS edge.
  • Lightly tap the ABS edge from the inside (trying to get air between the ABS edge and the casting).
  • Forcefully, but carefully, pull the ABS edge out of the groove.
  • By tapping over a block of wood, tap the side of the casting with a hammer until it separates from the laminate backing.

The package contains 1 piece of laminate base square with a milled circle of the given diameter + 1 piece of ABS edge with corresponding length.

Additional parameters

Category: Separators and Molds for Epoxy Casting
Warranty: 2 years

Be the first who will post an article to this item!

Do not fill out this field:

Synpo logo

SYNPO akciová společnost je již více než 70 let čelním představitelem aplikovaného výzkumu v oblasti pryskyřic, laků, nátěrových hmot, lepidel, tmelů a polymerů. Pod svojí značkou VEROPAL vyrábí čiré epoxidové pryskyřice, lepidla, tmely, kompozity a další polymerní produkty. Výrábí také velmi kvalitní průmyslové nátěrové hmoty Akrylmetal. Zabývá se smluvním výzkumem a vývojem a formulacemi v oblasti syntetických polymerů, nátěrových hmot, kompozitů a lepidel. Díky svým certifikovaným analytickým a zkušebním laboratořím udržují krok se světovými materiálovými trendy. Věnují se také zakázkové výrobě specialit v oblasti polymerní chemie a vývoji procesů na poloprovozním a výrobním zařízení. Od roku 2000 je u společnosti zaveden certifikovaný systém managementu jakosti dle ISO 9001. 

JF Avatar of author Jan Fojt | 10/05/2025
PH Avatar of author Peter Horniak | 10/05/2025
DP Avatar of author Daniel Prostějovský | 08/05/2025
Rychlé dodání, skvělá komunikace.
RH Avatar of author Rastislav Hricišin | 06/05/2025
Všetko v poriadku doporučujem
JC Avatar of author Jan Cejnar | 27/04/2025
Vše OK
TF Avatar of author Tomáš Fábry | 27/04/2025
TB Avatar of author Tomas Bakalik | 27/04/2025
maximální kvalita
FK Avatar of author František Kohoutek | 26/04/2025
ok
JH Avatar of author Jakub Hyxa | 26/04/2025
Rychlost 👌
AL Avatar of author Ales Lepsik | 25/04/2025
MM Avatar of author Martin Molík | 23/04/2025
PP Avatar of author Pavel Peňáz | 14/04/2025
SL Avatar of author Soňa Löfflerová | 14/04/2025
JP Avatar of author Jiří Piskora | 11/04/2025
VN Avatar of author Veronika Niksova | 05/04/2025
ML Avatar of author MARTIN LÖFFLER | 03/04/2025
GN Avatar of author Gabriela Nosková | 03/04/2025
Vše bylo v pořádku.
Avatar of author Martin Šimák | 31/03/2025
Vše proběhlo v pořádku
MK Avatar of author Milan Kohoutek | 29/03/2025
Perfektní. Nemám co dodat.
MK Avatar of author Martina Kuková | 28/03/2025
See more reviews

Store rating

5,0 1001 ratings

František Kohoutek | 26.04.2025
ok
Daniel Prostějovský | 08.05.2025
Rychlé dodání, skvělá komunikace.
Jakub Hyxa | 26.04.2025
Rychlost 👌
Jan Cejnar | 27.04.2025
Vše OK
Rastislav Hricišin | 06.05.2025
Všetko v poriadku doporučujem
Milan Kohoutek | 29.03.2025
Perfektní. Nemám co dodat.
Tomas Bakalik | 27.04.2025
maximální kvalita
Martin Šimák | 31.03.2025
Vše proběhlo v pořádku
Gabriela Nosková | 03.04.2025
Vše bylo v pořádku.