Rubio Monocoat WoodCream wax coating on wood
Code: 2006/100Product detailed description
Rubio < strong> WoodCream is a hydrophobic coating for wood with a thick consistency made on the basis of waxes and is intended for vertical structures such as wooden facades, garden houses, pergolas or garage spaces, gates, fences, etc.
It is applied in one layer, but it is possible to add a second layer if a richer shade is required.< /span>
Features:
- Breathable and has a water-repellent property - perfect absorption of the paint by the pores of the wood, without an sealing the surface. Thus, a natural balance of the moisture contained in the wood with the humidity of the environment is ensured. li>
- Made on the basis of RMC technology with the use of UV stabilizers, suitable for most woods.
- The unique creamy structure in combined with hydrophobic technology makes application easier, because the color does not run and spreads perfectly.
- Regulates humidity, repels water and has a self-cleaning effect.
- Maintenance is carried out with the same product without the need for sanding!
- Very low consumption
- For wood in the exterior: 1 l = approx. 12-20 m2, 100 ml approx. 1.2-2 m2 in one layer
Instructions for use - EXTERIOR:
This surface finish is suitable for vertical structures in an outdoor environment
- Recommended maximum wood moisture – 18%
- Designed for wooden buildings and constructions without contact with the ground corresponding to the ČSN EN 335-1 standard, classes 2 and 3
- Parts of buildings without dimensional stability, e.g.: wooden facades, pergolas, fences, garage spaces, garden houses, etc.
- Parts of buildings with limited dimensional stability, e.g.: wooden shutters, window frames, garden screens, etc.
- Use at temperatures of 10°C – 30°C
- Apply to vertical wooden surfaces
- The wood must be dry and clean
- In case of dirt, grease or mold - clean the wood with Rubio Monocoat Exterior Wood Cleaner. Dilute the preparation with water in a ratio of 1:10. After cleaning the wood, rinse the surface well with clean water and let it dry. Read the product 's data sheet before use
A) Application to new wood
- 1. Prepare the surface of the wood (planing, sanding, brushing...) 2. Remove dust thoroughly. 3. Mix Rubio WoodCream thoroughly before using (do not dilute with anything). 4. Apply evenly to vertical wood with a flat brush designed for waterborne products. Paint in the direction of the wood grain. For tiling, proceed in sections - paint 3-4 boards at the same time. It is good to proceed from the so-called wet to wet and with the last stroke to brush the entire board. 5. If you want to achieve a richer and more covering result, you can apply a second layer (after 3 hours). Since the first layer will already have a water-repellent effect, the second coat will not be applied as easily - we recommend to go over each spot several times with soft, long strokes.
B) Rubio WoodCream
's renovation or revival- 1. Clean the surface with water and a soft brush (do not use pressure cleaning). The surface does not need to be sanded. 2. Let the wood dry. 3. Mix Rubio WoodCream well and mix Rubio WoodCream Softener in a ratio of 9:1 (9 parts WoodCream and 1 part WoodCream Softener). You can dilute the most up to a ratio of 1:1 - according to the desired final shade. 4. Apply evenly to vertical wood with a flat brush designed for waterborne products. Paint in the direction of the wood grain. For tiling, proceed in sections - paint 3-4 boards at the same time. It is good to proceed from the so-called wet to wet and with the last stroke to brush the entire board.
C) For renovation of older coatings (other than Rubio WoodCream)
- 1. In case of dirt, grease or mold - clean the wood with Rubio Monocoat Exterior Wood Cleaner. Dilute the preparation with water in a ratio of 1:10. After cleaning the wood, rinse the surface well with clean water and let it dry. Read the product data sheet before use. 2. Clean the surface of all loose parts of previous coatings and unstable parts of the wood (by sanding or brushing with a steel brush) 3. Remove dust thoroughly - you can wipe the surface with a damp cloth and let it dry. 4. Apply Rubio WoodCream evenly to vertical wood with a flat brush designed for water-based products. Paint in the direction of the wood grain. For tiling, proceed in sections - paint 3-4 boards at the same time. It is good to proceed from the so-called wet to wet and with the last stroke to brush the entire board. 5. In the place of repainting of older coatings, glossier surfaces may appear than on cleaned wood, in which case apply one more coat.
Tips and tricks:
- Use only RMC products for surface preparation.
- The product must not be diluted with anything under any circumstances.
- Stir the WoddCream well.
- Never paint in direct sunlight and at temperatures below 10°C, but only work in dry weather.
- Do not cover the surface or place heavy objects on it until the WoodCream is cured.
Packaging:
- 100ml, 1L, 2.5L
Additional parameters
Category: | Rubio Monocoat exterior oils |
---|---|
Warranty: | 2 years |
Doba vytvrzení: | 7 dní |
? Prostředí: | Exteriér |
? Typ povrchové úpravy: | Vosky |
Vydatnost: | 12-20m2/L |
Be the first who will post an article to this item!
Be the first who will post an article to this item!
Kvalitní oleje Rubio Monocoat vyrábí belgická firma Muylle-Facon., která byla založena v roce 1906 a prvotně vyráběla vysoce kvalitní kyty a tmely pro dřevozpracující firmy a sklenáře. Časem rozšířili svojí působnost i na stavební chemii se zaměřením na materiály odolné vůči vodě, zejména vodotěsné nátěrové hmoty a tmely používané ve stavebnictví. Od roku 1962 začali vyrábět první řadu výrobků zaměřených na ošetření dřeva a jeho ochranu proti povětrnostním vlivům. Během doby se díky úzké spolupráci mezi oddělením vývoje a zákazníky z oblasti dřevozpracujícího průmyslu podařilo vyvinout unikátní jednovrstvý systém na ochranu dřeva: oleje Rubio Monocoat. V současné době jsou produkty Rubio Monocoat uznávané pro svou kvalitu a přístupnou cenu odběrateli po celém světě. Obchodní síť pokrývá 80 zemí od Austrálie přes Asii a Evropu po USA.
#ShowMore#
TECHNOLOGIE - OCHRANA DŘEVA ZALOŽENÁ NA MOLEKULÁRNÍ VAZBĚ
Díky unikátní a pokročilé technologii molekulární vazby, na níž jsou oleje Rubio založeny, dosahují mimořádných výsledků, zejména pokud jde o odolnost, cenovou výhodnost a snadné použití. Principiálně jde o to, že olej Rubio Monocoat reaguje během několika málo minut s horní vrsvou vláken dřeva a vytváří s ní silnou molekulárn vazbu, aniž by se vsakoval nebo tvořil na povrchu film. Touto technologií se Rubio odlišuje od jiných produktů na povrchovou úpravu dřeva.
UNIKÁTNÍ VLASTNOSTI
- Jedna vrstva stačí - jakmile dojde k vazbě mezi olejem a vlány dřeva , další olej již není absorbována další vrstva je již nadbytečná, takže spotřeba je mnohem nižší než u tradičních olejů
- Odolná ochrana - molekulární vazba zajišťuje dlouhodobou ochranu a vysokou odolnost. K dosažení vazby musíme nechat olej několik minut reagovat. Čím lepší bude reakce s vlákny dřeva, tím dokonalejší bude chrana povrchu
- Unikátní barvy - unikátní technologie pigmentovaných olejů Rubio Monocoat umožňuje dosáhnout sytých a výrazných barev pouze jednou vrstvou, aniž by byl potlačen přírodní vzhled dřeva a povrch zůstal příjemný na dotyk.
- Bez kocourů - vlákna celulozy, u kterých již došlo k molekulární reakci s olejem Rubio Monocoat, již další olej nepřijímají. Z toho důvodu při práci nevznikají nežádoucí "kocoury".
- 0% VOC přírodní produkt - Olej Rubio Monocoat neobsahuje rozpouštědla ani vodu. Výroba je založena na čistě přírodních složkách. Proto je použití tohoto produktu naprosto bezpečné jak pro nás, tak pro životní prostředí.
- Na všechny druhy dřeva - Olej Rubio Monocoat lze použít na téměř všechny druhy dřeva - na nábytek a podlahy, masivní dřevo, dýhu, MDF desky apod.
- Snadná údržba - povrch ošetřený olejem Rubio Monocoat se snadno udržuje. V případě menšího poškození či škrábance je možné takové místo lokálně opravit.