Osmo Top oil 3028 colorless semi-matt

Product detailed description

OSMO Top oil 3028 colorless semi-matt is a top treatment of natural surfaces while maintaining the natural appearance of the substrate. It is resistant to household chemicals and is hydrophobic, which means that it repels water well. Easy paint maintenance and high resistance to scratches and compressive stress. Any stains are easy to remove. Resistant to coffee, wine, alcohol and cola, resistant to sweat and saliva. Health-friendly with certification for contact with food, also suitable for children's toys.

Use for:

• interior spaces for furniture and worktops of solid and glued wood, cork and OSB boards and terracotta and other unglazed tiles.
• on the surface of the furniture
• on wood on walls and ceilings
• on children's wooden toys

Workflow:

1. Substrate preparation - the substrate for painting should have a maximum humidity of 20%. Osmo Top oil is ready for direct use, there is no need to dilute it. The wood surface must be dry, clean and not exposed to frost. Thoroughly clean old coatings, varnishes and paints. Sand wood surfaces with sandpaper - final sanding no coarser than P150.
2. The first coating on raw, sanded wood approx. 35ml / m2.It is best to apply with a lint-free cloth. ,
3. "Paint defects" can be corrected up to 15 minutes after the first application in a still wet area.
4. Drying approx. 8-10 hours (in normal climate approx. 23°C / relative humidity approx. 50%). At lower temperatures or higher relative humidity, the drying time increases. It is necessary to ensure good ventilation.
5. If required, the dried coating can be smoothed between coats with fine sandpaper (grain size 400) or schotchpad.
6. Second coat approx. 35ml / m2
7. Drying for about 8-10 hours. For conditions, see point 3.
8. Yield 24m2 / 1L.