Product detailed description

Veropal Quick is a very fast two-component epoxy glue that cures in 10 to 12  minutes after mixing. It can be colored and tinted with pigments and dyes and is sandable after 90 minutes.

• DESCRIPTION: VEROPAL QUICK is a unique very fast two-component structural epoxy glue with good peel and shear strength.
• USE: For structural bonding of a wide range of substrates – metals, metal constructions, wood, ceramics, it is suitable for gluing a number of polymer composite materials, such as glass fiber-reinforced polyesters, epoxies (SMC), etc. Suitable for small repairs of epoxy and wood (e.g. spalteds, cracks), for preparation quick repair sealant for wood (mix with sawdust and apply with a spatula). Professional and hobby use.
• CHEMICAL BASE: 2K epoxide,
• VISCOSITY BEFORE MIXING: 5-15 Pa.s at 25 °C,
• VISCOSITY AFTER MIXING: 10-20 Pa.s at 25 °C,
• WORKABILITY TIME: 2-3 min,
• GELATION TIME:  5-7 min,
• Tg (°C), via DSC: 50-60 °C,
• TENSILE STRENGTH (23 °C): 44-46 MPa,
• ELONGATION: 4-5 %,
• HARDNESS: (80 ± 2) ShD,
• SHEAR STRENGTH in 1 h at 23 °C: 8-10 MPa,
• SHEAR STRENGTH in 24 h at 23 °C: 12-14 MPa,
• PEEL STRENGTH in 24 h at 23 °C: 10 N/10 mm.

PACKAGING: 24ml cartridge.

Application of glue from the cartridge:

1. Break off the cover from tips of the tubes. Cover for outlets can be used for protection for further usage of adhesive.
2. Break off the plastic spatula placed besides the tubes.
3. Before extruding the necessary amount of glue, it is necessary to leave the cartridge in a vertical position with the outlets down, so that any air bubbles during extrusion do not affect the resulting ratio of components.
4. Then the required amount of glue is squeezed out and mixed with a spatula.
5. After mixing, the adhesive can be applied to glued substrates.