Veropal UV PLUS 121 Crystal Clear Epoxy Resin

Code: 50/1-2 50/6KG 50/12K Choose variant
NAŠE ZNAČKA - VYROBENO V ČR
Brand: Synpo

Veropal UV PLUS 121 Crystal Clear Epoxy Resin

Code: 50/1-2 50/6KG 50/12K Choose variant
NAŠE ZNAČKA - VYROBENO V ČR
Brand: Synpo

Veropal UV PLUS 121 is a fast, maximally UV stable, clear and optically pure casting epoxy resin suitable for casting small castings (e.g. jewellery) and thin layers up to 1 cm.

Supplied as a set of resin and hardener.

€31,37 / pcs €147,57 / pcs €274,89 / pcs from €31,37 / pcs €25,93 excl. VAT €121,96 excl. VAT €227,18 excl. VAT from €25,93 excl. VAT €26,14 / 1 kg €24,60 / 1 kg €22,91 / 1 kg
Vyprodáno Vyprodáno Vyprodáno Choose variant
Balení
Chosen variant is not available. Reset selected parameters.
Delivery to:
16/07/2025 16/07/2025 16/07/2025 Choose variant

Detailed information

Product detailed description

VEROPAL UV PLUS 121 is a crystal clear two-component epoxy resin for the production of small castings and thin layers up to 1 cm. It is highly UV-resistant, low-viscosity and self-levelling. It debubbles very well naturally, has low shrinkage when cured and creates a high gloss. Short processing time, the casting is clear and hard. It is beautifully fluid, odorless, with a simple mixing ratio. It can be easily colored, or partially fill with decorative items (stones, sequins, shards, etc.)

Usage:

  • Production of small castings and thin layers up to 1 cm,
  • Surface treatment of coffee tables, tables, furniture, clocks, lamps, etc.,
  • Production of jewelry and their semi-finished products,
  • Repairs of wooden surfaces by pouring over in a thin layer (e.g. chipped parts of epoxy after milling, etc.),
  • By mixing with sanding sawdust to create repair sealants for wood,
  • Production of advertising items,
  • Also suitable for closing pores in wood, it soaks well into wood,
  • Can be used for casting and gluing all types of materials (wood, concrete, glass, etc.) except plastics.

Features:

  • Maximum UV stability,
  • Mixing ratio by weight 100:20 (A:B),
  • Viscosity at 25 °C – 450-600 mPa.s,
  • Density at 23 °C – 1.06 g/cm3,
  • Appearance – water-clear liquid,
  • Dyeability – with suitable and compatible dyes and pigments,
  • Maximum layer thickness – 1 cm,
  • Maximum pouring volume – 1 L,
  • Workability time – <30 min./100 g,
  • Gelation time – depending on temperature, humidity, etc. – average is 3 hours,
  • Curing time, touch-dry – 12 hours,
  • Curing time – 24 hours,
  • Shrinkage – low,
  • Sensitivity to higher air humidity (>60 %) – micro-crystals of carbonate are formed on the surface, creating an unsightly surface,
  • Working temperature – 19-23 °C; cures at lower temperature but curing time will be extended,
  • Hardness after hardening – 80 ShD,
  • Appearance after curing – glassy,
  • Color of hardened casting – water-clear.

Packaging:

  • 1.2 kg (component A: 1 kg + component B: 0.2 kg)
  • 6 kg (component A: 5 kg + component B: 1 kg)
  • 12 kg (component A: 10 kg + component B: 2 kg)

 

SAFETY NOTICE:

Veropal UV PLUS 121 folder AVeropal UV PLUS 121 folder B

Additional parameters

Category: CLEAR CASTING RESIN
Warranty: 1 year
Certifikace styku s potravinami: Ne
UV stabilita: Maximální
DLE TYPU PRYSKYŘICE: ODLÉVACÍ
TYP VÝROBKU: ŠPERKY, PODTÁCKY
MAX. VRSTVA LITÍ: DO 1 CM
5
6x
4
0x
3
0x
2
0x
1
0x
Do not fill out this field:
5
AD Avatar of author | 01/02/2024
S pryskyřicí jsem spokojen, ale vždycky rostu z těch plechovek. Když chci odlít menší množství vždy to teče všude kolem jen né do kelímku.
5
JK Avatar of author | 07/05/2023
Jsem velmi spokojený s produktem.
5
TL Avatar of author | 10/02/2023
Byla to moje první zkušenost s epoxidovou pryskyřicí a asi jediné, co mě trošku zaskočilo, byla doba vytvrzování. Nějak jsem předpokládal, že pokud má pryskyřice tvrdnout 24 hodin při 23°C, tak bude po 24 hodinách při této teplotě plně vytvrzená. Ukázalo se, že odlitky (tloušťky cca 8mm) je lepší ponechat ve formičkách alespoň 48 hodin a opracovávat nejdříve 72 hodin po odlití. Jinak ale naprostá spokojenost, řádně vytvrzená pryskyřice je perfektně čirá a lze ji bez problémů frézovat, brousit i leštit.
5
BB Avatar of author | 05/02/2023
Dobry den produkt samotny je skvely, jen takova malickost, k plechovce by se hodil nastavec na nalevani, vzdycky neco malo zustane nahore. Jinak spokojenost.
5
EM Avatar of author | 21/01/2023
Díky za produkt, jsme velmi spokojeni, bezvadně se s ním pracuj.
5
K Avatar of author | 31/10/2022
Vynikající, výborná zpracovatelnost a výborný výsledek

Synpo logo

SYNPO akciová společnost je již více než 70 let čelním představitelem aplikovaného výzkumu v oblasti pryskyřic, laků, nátěrových hmot, lepidel, tmelů a polymerů. Pod svojí značkou VEROPAL vyrábí čiré epoxidové pryskyřice, lepidla, tmely, kompozity a další polymerní produkty. Výrábí také velmi kvalitní průmyslové nátěrové hmoty Akrylmetal. Zabývá se smluvním výzkumem a vývojem a formulacemi v oblasti syntetických polymerů, nátěrových hmot, kompozitů a lepidel. Díky svým certifikovaným analytickým a zkušebním laboratořím udržují krok se světovými materiálovými trendy. Věnují se také zakázkové výrobě specialit v oblasti polymerní chemie a vývoji procesů na poloprovozním a výrobním zařízení. Od roku 2000 je u společnosti zaveden certifikovaný systém managementu jakosti dle ISO 9001. 

VP Avatar of author Valentina Prokopová | 17/05/2025
PK Avatar of author Pavel Klepal | 16/05/2025
Opět maximální spokojenost
JF Avatar of author Jan Fojt | 10/05/2025
PH Avatar of author Peter Horniak | 10/05/2025
DP Avatar of author Daniel Prostějovský | 08/05/2025
Rychlé dodání, skvělá komunikace.
RH Avatar of author Rastislav Hricišin | 06/05/2025
Všetko v poriadku doporučujem
JC Avatar of author Jan Cejnar | 27/04/2025
Vše OK
TF Avatar of author Tomáš Fábry | 27/04/2025
TB Avatar of author Tomas Bakalik | 27/04/2025
maximální kvalita
FK Avatar of author František Kohoutek | 26/04/2025
ok
JH Avatar of author Jakub Hyxa | 26/04/2025
Rychlost 👌
AL Avatar of author Ales Lepsik | 25/04/2025
MM Avatar of author Martin Molík | 23/04/2025
PP Avatar of author Pavel Peňáz | 14/04/2025
SL Avatar of author Soňa Löfflerová | 14/04/2025
JP Avatar of author Jiří Piskora | 11/04/2025
VN Avatar of author Veronika Niksova | 05/04/2025
ML Avatar of author MARTIN LÖFFLER | 03/04/2025
GN Avatar of author Gabriela Nosková | 03/04/2025
Vše bylo v pořádku.
Avatar of author Martin Šimák | 31/03/2025
Vše proběhlo v pořádku
See more reviews