Veropal Transparent 200 Crystal Clear Epoxy Resin
Code: 1829/1-5Product detailed description
VEROPAL TRANSPARENT 200 is a crystal clear two-component epoxy resin for the production of medium-sized castings and for casting layers up to 5 cm. It is highly UV resistant with low viscosity and self-leveling. It debubbles very well naturally, has very low shrinkage when cured and produces a high gloss. It has a medium processing time, the casting is clear and hard. It is beautifully fluid, odorless, with a simple mixing ratio. It can be easily colored, or partially filled with decorative items (stones, sequins, shards, etc.)
-
Usage:
- Production of smaller epoxy conference and side tables and medium-sized castings.
- Production of epoxy lamps, clocks, serving boards, etc.
- Production of jewelry and their semi-finished products.
- Production of advertising items.
- Also suitable for closing pores in wood, it soaks well into wood.
- Can be used for casting and gluing all types of materials (wood, concrete, glass, etc.) except plastics.
-
Additional features:
- Appearance after mixing components A and B – water-clear liquid.
- Dyeability – with suitable and compatible dyes and pigments (see section PIGMENTS).
- Working temperature - ideally 19-23°C. It is possible to work at lower temperatures, e.g. (10-15°C), but it is necessary to take into account the slower hardening. Decreased temperature slows down the hardening process, increased temperature speeds it up.
- Appearance after curing – clear, glassy.
-
Packaging:
- 1.5 kg (component A: 1 kg + component B: 0.5 kg)
- 7.5 kg (component A: 5 kg + component B: 2.5 kg)
- 15 kg (component A: 10 kg + component B: 5 kg)
Additional parameters
Category: | CLEAR CASTING RESIN |
---|---|
Warranty: | 2 years |
Certifikace styku s potravinami: | Ne |
UV stabilita: | Vysoká |
Velikost odlitků: | Střední |
Maximální vrstva: | 5 cm |
Maximální objem: | 10 L |
Míchací poměr: | 100:50 hm.% |
Hustota při 23°C: | 1,05 g/cm3 |
Viskozita při 23°C: | 200 – 350 mPa.s |
Doba zpracovatelnosti: | < 3h/ 1 kg |
Doba gelace: | 12-16h v závislosti na podmínkách |
Vytvrzení suchý dotek: | 1-2 dny |
Doba vytvrzení: | 3 dny |
Doba plného vytvrzení: | 10-14 dní |
Pracovní teplota: | 19-23°C, možno i níže (10-15°C) - prodlouží se |
Barvitelnost: | Vhodnými a kompatibilními barvivy a pigmenty |
Smrštění: | nízké |
Tvrdost po vytvrzení: | 75 ShD |
Vzhled po vytvrzení: | sklovitý, čirý, vodojasný |
? UV stabilita: | Maximální |
Be the first who will post an article to this item!
SYNPO akciová společnost je již více než 70 let čelním představitelem aplikovaného výzkumu v oblasti pryskyřic, laků, nátěrových hmot, lepidel, tmelů a polymerů. Pod svojí značkou VEROPAL vyrábí čiré epoxidové pryskyřice, lepidla, tmely, kompozity a další polymerní produkty. Výrábí také velmi kvalitní průmyslové nátěrové hmoty Akrylmetal. Zabývá se smluvním výzkumem a vývojem a formulacemi v oblasti syntetických polymerů, nátěrových hmot, kompozitů a lepidel. Díky svým certifikovaným analytickým a zkušebním laboratořím udržují krok se světovými materiálovými trendy. Věnují se také zakázkové výrobě specialit v oblasti polymerní chemie a vývoji procesů na poloprovozním a výrobním zařízení. Od roku 2000 je u společnosti zaveden certifikovaný systém managementu jakosti dle ISO 9001.